Happymodel Crux3NLR

135 mm FPV quadcopter. Video profiles: analog.

Fpv, RacingVideo system: Analog
Compare this model
Happymodel Crux3NLR in an official product image

Official Happymodel product card. The stated cruise time of over 17 minutes is a manufacturer claim for one 18650 cell. The manufacturer excludes the battery and recommends Sony VTC6.Photo: Happymodel · Manufacturer product image; rights remain with the rights holder. · Image source The official Happymodel model gallery binds this exact model to the publisher image. Publisher download retained unchanged.

At a glance.

Specifications below are manufacturer claims. Check the original documentation for test conditions and configuration details.

Camera sensor
1/3-inch
Dry weight
68 g
Satellite navigation
Yes
Propeller diameter
2.952756 in
Motor model
EX1202.5
Firmware identity and version
CRAZYBEEF4SX1280 · O_H_5_REV16_8.HEX

Questions about Happymodel Crux3NLR

What dry weight is listed for Happymodel Crux3NLR?

68 g (Aircraft) — Manufacturer profile: Crux3NLR. Component: aircraft. Manufacturer explicitly excludes the battery.

Which sensor format is listed for Happymodel Crux3NLR?

1/3-inch (Camera) — Manufacturer profile: Crux3NLR. Component: camera.

View the specifications, conditions and sources

Full specifications

Data available for 18 of 120 characteristics

Figures may apply to different cameras, batteries or operating regions. Read the configuration, test conditions and source alongside each value. An unspecified capability does not mean it is absent.

Purpose and aircraft type
Fpv, Racing
Aircraftp06-purposes

Crux3NLR is configured for manual FPV racing; compatible goggles, radio and flight skills are required.

Dry weight
68 g
Aircraftp06-aircraft-mass17

Manufacturer profile: Crux3NLR. Component: aircraft. Manufacturer explicitly excludes the battery.

Sensor optical format
1/3-inch
Camerap06-part7-sensor0

Manufacturer profile: Crux3NLR. Component: camera.

Shutter type
PAL: 1/50~100,000; NTSC: 1/60~100,000
Camerap06-part7-shutter0

Manufacturer profile: Crux3NLR. Component: camera.

Satellite navigation
Yes
Aircraftp06-part6-gnss

Manufacturer profile: Crux3NLR. Component: aircraft.

GNSS constellations
Gps, Glonass, Sbas
Aircraftp06-part6-systems

Manufacturer profile: Crux3NLR. Component: aircraft.

FPV video ecosystems
Analog
Video systemp06-part7-analogue

Manufacturer profile: Crux3NLR. Component: video system. Explicit PAL/NTSC/CVBS camera signal, not inferred from RF frequency.

Flight controller MCU
STM32F411CEU6
Flight controllerp06-part2-mcu

Manufacturer profile: Crux3NLR. Component: flight controller.

ESC continuous current
5 A
ESCp06-part3-continuous

Manufacturer profile: Crux3NLR. Component: esc.

ESC burst current
6 A
ESCp06-part3-burst0

Manufacturer profile: Crux3NLR. Component: esc. Peak duration: 3 seconds.

Motor model
EX1202.5
Motorp06-part0-model0

Manufacturer profile: Crux3NLR. Component: motor.

Motor speed constant (KV)
11500 rpm/V
Motorp06-part0-kv0

Manufacturer profile: Crux3NLR. Component: motor.

Propeller model
Gemfan 75mm
Propellerp06-part1-model0

Manufacturer profile: Crux3NLR. Component: propeller.

Propeller pitch
0.9 in
Propellerp06-part1-pitch

Manufacturer profile: Crux3NLR. Component: propeller.

Propeller diameter
2.952756 in
Propellerp06-part1-diam0

Manufacturer profile: Crux3NLR. Component: propeller.

Firmware identity and version
CRAZYBEEF4SX1280
Flight controllerp06-part2-firmware0

Manufacturer profile: Crux3NLR. Component: flight controller. Manufacturer field label/target is retained as printed; vendor source-build equivalence and component openness are not established by the name.

O_H_5_REV16_8.HEX
ESCp06-part3-firmware0

Manufacturer profile: Crux3NLR. Component: esc. Manufacturer field label/target is retained as printed; vendor source-build equivalence and component openness are not established by the name.

Manufacturer sources

Sources checked 14 Nov 2026. Specifications can change with accessories, firmware and region.