Happymodel Larva X
100 mm FPV quadcopter. Video profiles: analog.

Photo: Happymodel · Manufacturer product image; rights remain with the rights holder. · Image source Published on the official Happymodel model page; publisher file downloaded unchanged.
At a glance.
Specifications below are manufacturer claims. Check the original documentation for test conditions and configuration details.
- Camera sensor
- 1/3-inch
- Dry weight
- 50 g
- Camera device model
- Runcam Nano2 · Nano 2
- Battery cell count
- ≥2 · ≤3 · …
- Video viewing in goggles
- Yes
- Motor model
- EX1103
- Flight controller model
- Crazybee F4FR V3.0 PRO · Crazybee F4FS V3.0 PRO · …
- Firmware identity and version
- CrazybeeF4FR · CrazybeeF4FS · …
Questions about Happymodel Larva X
What dry weight is listed for Happymodel Larva X?
50 g (Aircraft) — Manufacturer profile: Larva X. Component: aircraft. Manufacturer explicitly excludes the battery.
Which sensor format is listed for Happymodel Larva X?
1/3-inch (Camera) — Manufacturer profile: Larva X. Component: camera.
Full specifications
Data available for 22 of 120 characteristics
Figures may apply to different cameras, batteries or operating regions. Read the configuration, test conditions and source alongside each value. An unspecified capability does not mean it is absent.
- Purpose and aircraft type
- Fpv, RacingAircraftp07-purposes
Manufacturer profile: Larva X. Component: aircraft.
- Dry weight
- 50 gAircraftp07-aircraft-mass9
Manufacturer profile: Larva X. Component: aircraft. Manufacturer explicitly excludes the battery.
- Sensor optical format
- 1/3-inchCamerap07-part7-sensor0
Manufacturer profile: Larva X. Component: camera.
- Shutter type
- AutoCamerap07-part7-shutter0
Manufacturer profile: Larva X. Component: camera.
- Field of view
- 155 degCamerap07-part7-fov3-0
Manufacturer profile: Larva X. Component: camera. Axis: unspecified.
- Camera device model
- Runcam Nano2Camerap07-pkg0-9-camera
Manufacturer profile: Larva X. Component: camera.
Nano 2Camerap07-part7-identityManufacturer profile: Larva X. Component: camera.
- Video viewing in goggles
- YesVideo systemp07-osd-goggles15
Manufacturer profile: Larva X. Component: video system. Manufacturer explicitly describes OSD information viewed on goggles; compatible goggles models and head tracking are not established. Any DSMX RSSI exception in the source is receiver-specific.
- FPV video ecosystems
- AnalogVideo systemp07-part6-included-camera-analogue
Manufacturer profile: Larva X. Component: video system. Explicit PAL/NTSC/CVBS camera signal, not inferred from RF frequency.
AnalogVideo systemp07-part7-analogueManufacturer profile: Larva X. Component: video system. Explicit PAL/NTSC/CVBS camera signal, not inferred from RF frequency.
- Transmission system
- Frsky D8/D16Receiverp07-part4-protocol
Manufacturer profile: Larva X. Component: receiver.
AFHDS-2A; AFHDSReceiverp07-part5-protocolManufacturer profile: Larva X. Component: receiver.
- Radio bands
- 5.8 GHzVideo systemp07-part6-bands
Manufacturer profile: Larva X. Component: video system.
- Live view width
- 1280 pxVideo systemp07-part6-live0
Manufacturer profile: Larva X. Component: video system. Explicit video-link output tuple; not a camera recording-file claim.
- Live view height
- 720 pxVideo systemp07-part6-live0
Manufacturer profile: Larva X. Component: video system. Explicit video-link output tuple; not a camera recording-file claim.
- Live view frame rate
- 25 fpsVideo systemp07-part6-live0
Manufacturer profile: Larva X. Component: video system. Explicit video-link output tuple; not a camera recording-file claim.
- Video transmitter conducted output
- ≥25 mWVideo systemp07-part6-powerrange0-0-min
Manufacturer profile: Larva X. Component: video system. Published switchable RF-output range 25–200 mW.
≤200 mWVideo systemp07-part6-powerrange0-0-maxManufacturer profile: Larva X. Component: video system. Published switchable RF-output range 25–200 mW.
- Flight controller model
- Crazybee F4FR V3.0 PROFlight controllerp07-pkg0-2-fcname0-0
Manufacturer profile: Larva X. Component: flight controller.
Crazybee F4FS V3.0 PROFlight controllerp07-pkg0-3-fcname0-0Manufacturer profile: Larva X. Component: flight controller.
Crazybee F4FS V3.0 PROFlight controllerp07-pkg0-4-fcname0-0Manufacturer profile: Larva X. Component: flight controller.
CRAZYBEE F4FR PRO V3.0Flight controllerp07-part2-fcname1-0Manufacturer profile: Larva X. Component: flight controller.
- Flight controller MCU
- STM32F411CEU6Flight controllerp07-part2-mcu
Manufacturer profile: Larva X. Component: flight controller.
- ESC continuous current
- 10 AESCp07-part3-continuous
Manufacturer profile: Larva X. Component: esc.
- ESC burst current
- 12 AESCp07-part3-burst0
Manufacturer profile: Larva X. Component: esc. Peak duration: 5 seconds.
- Motor model
- EX1103Motorp07-part1-model0
Manufacturer profile: Larva X. Component: motor.
- Motor speed constant (KV)
- 7000 rpm/VMotorp07-part1-kv0
Manufacturer profile: Larva X. Component: motor.
- Battery cell count
- ≥2Batteryp07-input-min13-0
Manufacturer profile: Larva X. Component: battery. Whole-aircraft compatibility from the manufacturer feature list: 2–3S LiPo/LiHV.
≤3Batteryp07-input-max13-0Manufacturer profile: Larva X. Component: battery. Whole-aircraft compatibility from the manufacturer feature list: 2–3S LiPo/LiHV.
2Batteryp07-input21-0Manufacturer profile: Larva X. Component: battery.
3Batteryp07-input21-1Manufacturer profile: Larva X. Component: battery.
- Firmware identity and version
- CrazybeeF4FRFlight controllerp07-part2-firmware0
Manufacturer profile: Larva X. Component: flight controller. Manufacturer field label/target is retained as printed; vendor source-build equivalence and component openness are not established by the name.
CrazybeeF4FSFlight controllerp07-part2-firmware1Manufacturer profile: Larva X. Component: flight controller. Manufacturer field label/target is retained as printed; vendor source-build equivalence and component openness are not established by the name.
CrazybeeF4DXFlight controllerp07-part2-firmware2Manufacturer profile: Larva X. Component: flight controller. Manufacturer field label/target is retained as printed; vendor source-build equivalence and component openness are not established by the name.
F_H_40_REV16_5.HEXESCp07-part3-firmware0Manufacturer profile: Larva X. Component: esc. Manufacturer field label/target is retained as printed; vendor source-build equivalence and component openness are not established by the name.
Manufacturer sources
Sources checked 14 Nov 2026. Specifications can change with accessories, firmware and region.