Drones for travel. · Camera
Compare camera drones for filming your travels, or explore FPV for creative shots. Browse manufacturers
Manufacturer specifications, with sources and limitations. Maximum flight figures are measured under test conditions and are not a promised flight duration.

Cinebot25 V2
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
The second Cinebot25 generation combines O4 Pro video, a TAKER F722 35A AIO and GEP-M10nano GPS. Its table names HQProp DT63mm three-blade propellers.
- Weight
- Not specified
- Maximum flight time
- 5 min · 8 minConfiguration details

Cinebot30
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
Cinebot30 has 4S and 6S motor options and several analogue or digital camera builds. GEPRC explicitly separates battery-free masses for Nebula Pro, analogue, Link Wasp and O3 versions.
- Dry weight
- 222.5 g · 209.2 g · …Configuration details
- Maximum flight time
- 5 min 30 s · Up to 10 min 30 sConfiguration details

Cinebot35
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
Cinebot35 uses an H743 controller, H60 Mini ESC and 90mm propellers. Its O4 Pro camera unit has a separate vibration-damped mount, and the specification includes GEP-M10Q GPS hardware.
- Weight
- Not specified
- Maximum flight time
- 10 min · 11 minConfiguration details

CineLog20
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
CineLog20 uses O3 video and EMAX Avan Micro 2×2.4×4 propellers. Its table identifies GR1303.5 5500KV motors and recommends LiHV 4S 450–660mAh.
- Weight
- Not specified
- Maximum flight time
- 4 min · 6 minConfiguration details

CineLog25
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
The first CineLog25 analogue table explicitly lists 128g without battery. It pairs an F411 AIO with GR1404 4500KV motors and GEMFAN D63-3 propellers.
- Dry weight
- 128 gConfiguration details
- Maximum flight time
- 5 min 30 sConfiguration details

CineLog25 V2
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
CineLog25 V2 uses O3 video, a TAKER G4 35A AIO and 1404 4500KV motors. GEPRC lists a 4–6-minute flight duration and optional M10 nano GPS.
- Weight
- Not specified
- Maximum flight time
- 4 min · 6 minConfiguration details

CineLog30
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
The first CineLog30 Link Wasp build lists 165.4g for PNP without battery. Its Runcam camera and VISTA transmitter are distinct from the later O3 and O4 generations.
- Dry weight
- 165.4 gConfiguration details
- Maximum flight time
- 7 min 30 sConfiguration details

CineLog30 V2
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
The O3 CineLog30 V2 combines a TAKER F722 45A AIO with 1404 3850KV motors and 76mm propellers. GEPRC separately advertises 249g takeoff mass with a 4S 720mAh battery.
- Ready-to-fly weight
- 249 gConfiguration details
- Maximum flight time
- 6 min · 8 min 30 sConfiguration details

CineLog30 V3
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
CineLog30 V3 lists an O4 Pro video unit, SPEEDX2 1404 3850KV motors and HQprop DT76mm three-blade propellers. Its controller firmware target is GEPRC_F722_AIO.
- Weight
- Not specified
- Maximum flight time
- Up to 8 min 10 sConfiguration details

CineLog35 V2
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
CineLog35 V2 combines O3 video, SPEEDX2 2105.5 2650KV motors and a GEP-M10 GPS module. The published flight-duration range is 5 min to 8 min 30 s.
- Weight
- Not specified
- Maximum flight time
- 5 min · 8 min 30 sConfiguration details

CineLog35 V3
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
The third CineLog35 generation pairs O4 Pro video with a GEP-F722-45A AIO V2 and SPEEDX2 2105.5 2650KV motors. Its propeller entry names HQProp D-T90MM.
- Weight
- Not specified
- Maximum flight time
- 7 min · 8 min 30 sConfiguration details

Crocodile5 Baby LR
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
Crocodile5 Baby LR uses four-cell power, GR2004 2550KV motors and GEP-M10 GPS. GEPRC describes Betaflight GPS Rescue returning near the start position, followed by manual landing.
- Weight
- Not specified
- Maximum flight time
- 27 min · 25 min · …Configuration details

DarkStar16
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
A small O4 Pro whoop with a TAKER F411 AIO, Bluejay ESC firmware and Gemfan1636-4 propellers. The duration entry specifies four minutes of low-speed indoor cruising on LiHV 2S 530mAh.
- Weight
- Not specified
- Maximum flight time
- 4 minConfiguration details

DarkStar20
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
An O3 whoop with SPEEDX2 1102 10000KV motors and a Bluejay 12A ESC. Its 4 min 40 s duration describes low-speed indoor cruising; the recommended pack is LiPo 2S 500mAh.
- Weight
- Not specified
- Maximum flight time
- 4 min 40 sConfiguration details

DarkStar22
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
DarkStar22 uses O4 Pro, a TAKER F405 20A AIO and GP2219-3 propellers. GEPRC lists a 6 min 45 s smooth-cruise duration and recommends a LiHV 3S 720mAh battery.
- Weight
- Not specified
- Maximum flight time
- 6 min 45 sConfiguration details

DarkStar25
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
The captured DarkStar25 table names an O4 Wide air unit, a TAKER F722 35A AIO and 1404 4600KV motors. GEP-M10 Nano GPS is optional.
- Weight
- Not specified
- Maximum flight time
- 6 min 20 s · 8 min 30 sConfiguration details

DoMain3.6
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
DoMain3.6 is the smaller analogue DoMain airframe with GEMFAN 3630-3 propellers. It retains a TAKER F722 SE controller and SPEEDX2 2105.5 2650KV motors.
- Weight
- Not specified
- Max. flight time
- Not specified

DoMain4.2
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
The analogue DoMain4.2 configuration uses a Runcam phoenix2p camera, RAD MINI video transmitter and SPEEDX2 2105.5 motors. Its table recommends a 6S 1050–1300mAh battery.
- Weight
- Not specified
- Max. flight time
- Not specified

T-Cube18
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
T-Cube18 uses 45mm propellers, 1002 18000KV motors and a TAKER F411 AIO. The product table specifies DJI O4 Air Unit and recommends LiHV 2S 380mAh.
- Weight
- Not specified
- Maximum flight time
- 3 min · 5 minConfiguration details

Tern40 LR V2
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
A four-inch FPV platform with DJI O4 Pro, a TAKER F722 controller and GEP-M10nano GPS hardware. GEPRC gives a 12-minute duration for a LiHV 4S 720mAh battery, landing at 3.6V per cell.
- Weight
- Not specified
- Maximum flight time
- 12 minConfiguration details

Tern-LR40
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
The original analogue Tern-LR40 table lists a RAD mini 1W transmitter, Caddx Ratel2 camera and 1404 3000KV motors. A four-cell battery is recommended.
- Weight
- Not specified
- Maximum flight time
- 10 min · 25 minConfiguration details

TinyGO
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
TinyGO is one whoop platform offered in normal and recording-camera kits. The captured 4K kit includes a Loris camera and GEPRC RG1 goggles; a dated change log identifies the later integrated ELRS receiver.
- Weight
- Not specified
- Maximum flight time
- >6 minConfiguration details

TriPro6
Photo: GEPRC · Manufacturer product image; rights remain with the rights holder.
A six-inch O4 Pro platform using SPEEDX2 2205E motors and a GEP-M10 GPS module. The flight-controller firmware target is explicitly listed as GEPRC_F722_AIO_4.5.2.
- Weight
- Not specified
- Maximum flight time
- 26 min · 28 minConfiguration details

Happymodel CINE8
The complete CINE8 DIY kit is shown before assembly, with the manufacturer’s component labels. Assembly is required.
Photo: Happymodel · Manufacturer product image; rights remain with the rights holder.
Complete 85 mm FPV Cinewhoop kit requiring assembly; camera, VTX, controller and propulsion parts are included.
- Dry weight
- 73 gConfiguration details
- Max. flight time
- Not specified